Torque is the bench mechanics quiet specialty. Carbon bars at 5 Nm, stem face-plates at 56 Nm, crank bolts at 3550 Nm, rotor bolts at 56 Nm per rotor manufacturers spec; get any of them wrong, and the result is a customer ticket and a warranty claim. The SET4-2600AC Torque Tools and Pliers tray for the Unior 2600A and 2600C benches bundles the torque-and-precision-socket inventory into one foam-cut bench drawer: the 266B Electronic Torque Wrench, the full 1/4 and 1/2 socket range, Y-handle hex and Torx, and the everyday pliers.

Whats in the tray

Electronic torque wrench (the centerpiece):

• Electronic Torque Wrench 266B; covers 4.285 Nm. Spans rotor bolts (56 Nm) through crank bolts (3550 Nm) and BB cup installs (3550 Nm). For lower-torque carbon-bar work (2-20 Nm), shops typically pair with the matching 120 Nm wrench.

Y-handle wrenches:

• Y hex wrench (1781/2HX-US); 2/2.5/3 and 4/5/6 mm.
• Y Torx wrench (1781/2TX-US); T10/T15/T25.

1/4 socket system:

• Reversible ratchet 1/4 (188.1/1ABI-US)
• Extension bar 1/4 (188.4/2)
• Adaptor 1/4 (188.7/2)
• Socket 1/4, 6-point (188/2 6P)

1/2 socket system:

• Swivel handle 1/2 (190.2/1BI-US)
• Extension bar 1/2 (190.4/1)
• Adaptor 1/2 (190.7/2)
• Socket 1/2, 6-point (190/1 6P)

Hex sockets:

• Hex socket 1/4 (187/2HX); 1/4 drive hex sockets.
• Hex socket 1/2 (192/2HX); 1/2 drive hex sockets.
• Long hex socket 1/2 (192/2HXL); extended-reach 1/2 hex.

Torx sockets and bits:

• Screwdriver socket with TX profile 1/4 (187/2TX).

L-handle and ball-end hex:

• T-handle ball-end hex wrench (193HXS-US)
• Hex wrench (220/3); standard L-key.
• Hex wrench, long type (220/3L); long-arm version for reach.
• Ball-end hex wrench, long type (220/3SL); ball-end + long-arm.
• Wrench with TX profile and hole (220/7TX); security-Torx capable, T-handle.

Pliers (everyday workshop):

• Combination wrench, long type (120/1)
• Cable puller pliers with lock (1642.1/2P-US); locks onto cable end and holds while bolt is torqued.
• Combination pliers (406/1VDEBI); VDE insulated.
• Waterpump box joint pliers (449/1PYTHON-US); adjustable, with plastic jaw protection (449.1) for not marring component surfaces.
• Long-nose pliers with side cutter (506/1VDEBI); VDE insulated.

The tray ships with the empty foam shell (VL4-2600AC).

Why this is the precision tray

The 266B torque wrench is the line-item that justifies the tray cost. Calibrated torque wrenches separate professional service from amateur service in the bike industry; the difference shows up in carbon-component warranty claims, stripped crank bolts, and brake-caliper-bolt fatigue failures. The 266Bs dual-drive range (1/4 through 1/2) covers the full bike-fastener torque band in one tool; the matching socket range completes the inventory.

For shops not adding the torque wrench, the SET1-2600AC general-tools tray covers everyday Hex and Phillips work without the torque element. The SET4-2600AC adds the precision-and-torque layer above SET1.

Compatibility

Sized for the bench-integrated 990WD7 drawer in the Unior 2600A and 2600C workbenches.

Built in Zree, Slovenia

Unior has been forging hand tools in Zree since 1919, and sponsors professional road and mountain-bike race teams. The 266B Electronic Torque Wrench is part of Uniors calibrated-tool line; the bit-socket sizes are manufactured to DIN 7422 (hex bit socket dimensional standard).

Pro tip from our mechanics

SET4-2600AC is the tray that justifies the bench-and-cabinet investment by service quality, not by service speed. A torque-controlled crank install lasts the life of the crank; a feel-based install can fatigue the bolt in two years. Our broader workshop-setup guide covers when calibrated torque is required versus when a feel-based setting suffices: How to set up a professional bike workshop